Skip to content

Commercial drainage services

Commercial drain jetting and blockage clearance

High-pressure water jetting that clears fat, scale, silt and debris from commercial drains and gets kitchens, washrooms and yards working again.

  • Commercial property only, planned around your site
  • Footage, photos and a written report where we survey
  • Coverage throughout the South East

Free, no-obligation site survey

Request a site survey

Fields marked * are required. We'll only use your details to respond to this enquiry. See our privacy notice.

Jetting and Blockages, explained

Drain jetting uses a high-pressure water hose and specialist nozzles to clear blockages and scour build-up from the inside of drain pipes. BAES Drainage provides jetting for restaurants, offices, retail units, industrial estates and managed buildings across West Sussex, East Sussex, Surrey, Kent and Hampshire, working from our base in Worthing.

Commercial drains take a heavier load than most. Kitchens send down fat and food waste, washrooms in busy buildings see constant use, and yards and car parks wash silt, grit and leaves into gullies. Over time this narrows pipes until they block.

Jetting scours the inside of the pipe rather than just pushing a hole through the blockage, which helps restore flow along the whole run. It relies on the force of the water, so the jetting itself needs no chemicals.

Where a drain keeps blocking, we use a camera to look for the cause, because repeat blockages can point to a defect that jetting alone will not fix.

The problems it solves

  • Blockages that stop trading

    A blocked kitchen drain can force a restaurant to stop cooking, and a blocked washroom can close part of an office or shop. Jetting clears the blockage and the build-up behind it, so the site can get back to normal. Removing the build-up, not just the blockage, also helps reduce the chance of the same run blocking again.

  • Fat, oil and grease in the sewer

    Under section 111 of the Water Industry Act 1991, it is an offence to let anything into a public sewer, or a drain connected to one, that is likely to interfere with the free flow of its contents. Regular jetting of kitchen runs, alongside properly maintained grease traps, helps stop fat building up in your drains and moving on into the public sewer.

  • Flooding claims and insurers

    A blocked drain that backs up into a building can damage stock, fit-out and neighbouring units. Clearing build-up before it causes a backup, and keeping a dated record of when drains were cleaned, gives you evidence of how the drainage has been looked after if an insurer asks.

  • Smells and slow drains in shared buildings

    Partly blocked drains cause smells, gurgling and slow sinks that occupiers notice and report. Jetting removes the build-up behind them, which helps reduce repeat complaints to managing agents and building managers.

How it works

  1. Call and triage

    You tell us what is happening and where, and we ask about the site, access and any history of blockages so the right equipment comes out.

  2. Locate the blockage

    On site we lift chambers to find where flow stops and work out which run is affected.

  3. Jet and clear

    We jet from the most suitable access point, using the right nozzle for the job, such as one for fat, one for scale or a root cutter.

  4. Check the result

    We confirm the run is flowing and, where needed, put a camera through to check the pipe is clean and look for any damage.

  5. Report and advise

    You get a short report of what was found and done, with photos, and advice if the run needs repair or regular maintenance.

Sectors we work in

  • Retail and shopping centres
  • Hospitality and food service
  • Offices and business parks
  • Industrial and logistics
  • Education
  • Healthcare
  • Managed residential blocks
  • Car parks and forecourts
Cover of the BAES Drainage Compliance Checklist

Free resource

The Drainage Compliance Checklist

A practical checklist for facilities and estates teams: what to inspect, what to record and what insurers and inspectors expect to see.

Get the checklist

Jetting and Blockages: your questions

Is high-pressure jetting safe for old drains?

Usually, as long as the jetting is matched to the pipe. The national occupational standard for drainage jetting covers choosing nozzles and settings to suit the pipe material, and the damage excessive jetting can cause. Old clay, pitch fibre or already damaged pipes need more care, and where the condition is unknown a camera inspection first is sensible. If a pipe is badly cracked or collapsed, jetting will not fix it and we will tell you what the options are.

Why does our kitchen drain keep blocking?

A common cause is fat, oil and grease. Water UK guidance for caterers explains that it hardens as it cools and sticks to the inside of pipes, narrowing them until food waste catches and blocks them. Missing or poorly maintained grease traps make this worse, as can a sag or defect in the pipe that holds waste. Jetting clears the build-up, and a camera survey shows whether there is a structural cause behind repeat blockages.

Can you jet drains without closing our site?

Usually the disruption is limited to the area around the chambers being worked on. We can plan jetting for quieter times, such as before opening or after service, so kitchens and washrooms are not out of use when you need them. Tell us your trading hours and we will plan around them where we can.

Do you clear surface water drains in car parks and yards?

Yes. Gullies, channel drains and surface water runs collect silt, grit, leaves and litter, and can overflow in heavy rain if they are not cleaned. We jet the runs and clear out gullies and catch pits so water can get away. For sites that flood regularly, we can look at whether the system needs more than cleaning.

Is it better to jet drains regularly or only when they block?

For drains that block often, such as kitchen runs and busy toilet blocks, scheduled jetting is often less disruptive than waiting for a blockage, because it helps keep pipes clear and the work can be planned for a convenient time. For low-risk runs, reactive clearance may be enough. We can advise on which runs are worth putting on a schedule.

Areas we cover

From our base in Worthing we look after commercial sites across West Sussex, East Sussex, Surrey, Kent and Hampshire. Pick your town to see local drainage information.

Map of the South East towns BAES Drainage coversWorthing (base)ChichesterHorshamCrawleyBrightonEastbourneHastingsHorleyGuildfordMaidstoneSouthamptonWinchesterBasingstoke

Drainage problem? Call now.

Flooding, backing up or a blocked kitchen line? Speak to the team about the next step.

01903 650120

Tell us about the site and the problem. We will come back to you to talk it through, arrange a survey or get an engineer booked in.

  • Commercial specialistsWe only work on commercial property, so we plan around trading hours, tenants and access.
  • Clear reportingFindings, photos and recommendations in plain English, ready to share with your team or insurer.
  • One BAES teamPart of BAES Building and Estate Services, so facilities, security and vacant property work can sit with the same team.
Call 01903 650120Site survey